Thirty years experience testing and manufacturing quality long life pins and bushings for high wear environments on vehicles and like applications.
  
 

NO-REAM PLUS KIT INSTALLATION for KING PIN STEERING KNUCKLE REPAIRS - Page 2 of 2
INSTALL TOP BUSHING WITH SPINDLE ON AXLE

13. Position the bushing on the end of the KAISER bushing driver that has the short pilot (see illustraton) to prevent damaging the presized bushing while driving it in the bore. Place in bore and drive the bushing in until flush with top of the bore or until driver contacts the top of the king pin. Remove the driver and use a brass drift to finish the installation.

14. Reposition the king pin to align the lock flats and install the lock pins but do not set them.
15. After installing end plates set lock pins in the axle.

16. Contnue with established procedures to complete the assembly.

GREASING

Greasing through end plate: Apply grease to grease fitting in each end plate until grease appears between wear surfaces (axle and spindle).
Side spindle greasing: Apply grease to grease fittings on the side of each bore until grease appears between wear surfaces (axle and spindle).

FINAL INSPECTION

Make a final check of the assembly before placing vehicle in service by moving each spindle side to side. There should be a smooth (no binding) movement. If binding occurs, the assembly should be checked for king pin alignment and spindle bore conditions (parallel alignment and out of round conditions).
WARRANTY:
V.W Kaiser Engineering. Inc. warrants the parts contained in Kaiser products to be free from defects in material and workmanship, under normal use and maintenance for a period of one year. This warranty shall be limited to replacing or allowing credit for the parts contained in the Kaiser products provided that notice of defects and proof is promptly given. This warranty does not apply to damage or to defects in any parts contained in the Kaiser products caused by misuse, neglect, accident, incorrect installation, alteration or repair. THIS WARRANTY, AND THE MANUFACTURER'S OBLIGATION HEREUNDER IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER OBLIGATIONS OR LIABILITIES, INCLUDING SPECIAL OR CONSEQUENTIAL DAMAGES

WARRANTY CLAIMS:
The following procedure applies under this warranty: a. All parts under warranty must be returned to the seller (authorized distributor). The seller returns the parts in question with a complete history along with information of the vehicle from which the parts were removed, prepaid, to V.W.Kaiser Engineering, Inc., 8642 Gleason Street, Millington, Michigan, 48746, for SERVICE ANALYSIS. Items approved as defective under terms of the warranty will be replaced. All claims will receive a SERVICE ANALYSIS report.

CALL FOR ASSISTANCE: Business hours: 8:00 A.M. to 5:00 PM. EST. Call will be answered direct by technical service people. After hours: Place message on answering machine. Calls will be returned next working day or sooner. CUSTOMER SERVICE: 888-854-6474 (888-8KingPin)

WARNING: During removal and installation procedures, never use steel hammer or tool to strike hardened metal parts, i.e, King Pin. Failure to heed warning could crack or shatter part, creating a risk of personal injury to the servicing technician and/or component damage which may jeopardize the safety of the vehicle user. For proper removal and installation procedures, refer to axle manufacturer's service literature.